
Model DU Dual-Element Contact Transducers
Model DU are general purpose dual-element transducers with side-mounted microdot connectors. Replaceable/interchangeable delay lines and cross-talk barriers greatly extend versatility, cost-effectiveness, service life, and can be contoured to fit I.D. or O.D. curved surfaces.
Dual-Element Contacts
Are longitudinal-wave (straight beam) transducers designed for near-surface and thin-range flaw detection and thickness measurement. Two elements, one transmitter, and one receiver are mounted at an included (roof) angle to improve signal-to-noise ratio and optimize near-surface resolution.

Element Dimensions | A | B | C | ||||
---|---|---|---|---|---|---|---|
inch | mm | ||||||
0.5 x 0.5 | 12.7 x 12.7 | 0.89 in. | 22.6 mm | 0.92 in. | 23.4 mm | 0.78 in. | 19.8 mm |
0.5 x 1 | 12.7 x 25.4 | 1.39 in. | 35.3 mm | 0.92 in. | 23.4 mm | 0.78 in. | 19.8 mm |
Frequency (MHz) | Element Dimensions | Part Number | |||
---|---|---|---|---|---|
inch | mm | GP* | Delay Set | Accessories | |
2.25 | 0.5 x 0.5 | 12.7 x 12.7 | 00-012322 | 01-010740 | Dual Cable |
0.5 x 1 | 12.7 x 25.4 | 00-012323 | 01-010741 | MD - BNC | |
5 | 0.5 x 0.5 | 12.7 x 12.7 | 00-010487 | 01-010740 | 6-ft (1.83 m ) |
5 | 0.5 x 1 | 12.7 x 25.4 | 00-010584 | 01-010741 | 07-010012 |
* GP = General Purpose; See appendix for technical details.